Army Research Laboratory, Aberdeen Proving Ground, MD, 2004
Date
2004
Label
Army Research Laboratory, Aberdeen Proving Ground, MD, 2004
Name
Army Research Laboratory
Place
Aberdeen Proving Ground, MD
Provider agent
Provider place
Incoming Resources
- Publication of39
- Procedures for using the AMANDA model in acceleration response studies (tutorial by example), Owen P. Litt
- Parallel MuSES for infrared signature modeling of U.S. Army vehicles and targets, Rama R. Valisetty and Raja R. Namburu, George Petit
- Lateral control jet aerodynamic predictions for a 2.75-in rocket testbed munition, by Paul Weinacht
- A hybrid explicit/implicit solvent technique for biomolecular simulations, Michael S. Lee, Mark A. Olson
- Autonomous identification of vertical lines in video images to assist in UGV cover and concealment, William F. Oberle
- Dynamics of flash tube seals in 30-mm ammunition, by Stephen L. Howard
- Recommendations for a new and improved ORCA modeling system blast module, Owen P. Litt
- Analytical calculation of helicopter main rotor blade flight loads in hover and forward flight, by Ki C. Kim
- Outdoor exposure results for pretreated and topcoated aluminum armor alloys 2519, 5083, 7039, John V. Kelley and Brian E. Placzankis
- Assessment of paint layers by FE-SEM and EDS examination, by Donovan Harris
- Spall strength of tungsten carbide, Dattatraya P. Dandekar
- The response of propellants to plasma radiation, by Richard A. Beyer and Rose A. Pesce-Rodriguez
- Multispecies reacting flow model for the plasma efflux of an ETC igniter, application to an open-air plasma jet impinging on an instrumented probe, by Michael J. Nusca, William R. Anderson, and Michael J. McQuaid
- High-performance computing and simulation for advanced armament propulsion, by Michael J. Nusca
- Modeling thermal ignition of energetic materials, Norman J. Gerri and Ellen Berning
- A human factors assessment of the maneuver command and control (MC2) interface at company level and below, Bruce S. Sterling and Cheryl A. Burns
- Explosive bonding of refractory metal liners, William S. de Rosset
- Projectile dispersion of a marker ball launcher, Peter J. Fazio
- Assessment of some chromated and non-chromated primers on magnesium ZE41A, aluminum 2024, and steel 4340 via electro-chemical impedance spectroscopy, John V. Kelley
- Attitude determination with magnetometers for gun-launched munitions, Michael J. Wilson
- LADAR - camera registration using object pose and camera calibration algorithms, by William F. Oberle and Gary A. Haas
- Evaluation of an army aviator's ability to conduct ingress and egress of the RAH-66 Comanche crew station while wearing the air warrior ensemble, Joshua S. Kennedy [and others]
- Prediction of the pitch-damping coefficients using Sacks' relations, by Paul Weinacht and James E. Danberg
- Development of a nonperiodic homogenization method for one-dimensional continua, by Michael J. Leamy, Peter W. Chung, and Raju Namburu
- Characterization of candidate materials for composite cartridge case, Aristedes Yiournas [and others]
- Transverse compression response of a multi-ply kevlar vest, Martin R. Raftenberg, Michael J. Scheidler, and Paul Moy
- Hardening and testing the video transmitter and camera for the shoulder-fired video imager, Michael L. Nair
- Replacement alternatives to the chromate wash primer DOD-P-15328D, by Pauline Smith [and others]
- Numerical investigation of aerodynamics of canard-controlled missile using planar and grid tail fins, by James DeSpirito, Milton E. Vaughn, Jr., and W. David Washington, Part II
- Human factors evaluation of Land Warrior, version 1.0, Andrea S. Krausman [and others]
- Breathability and selectivity of selected materials for protective clothing, Eugene Napadensky and Yosef A. Elabd
- Overview of reduction methods and their implementation Into finite-element local-to-global techniques, Michael A. Minnicino II and David A. Hopkins
- A 2-D axisymmetric model of a stretching jet in ALEGRA, Müge Fermen-Coker
- Sample preparation procedure for TEM imaging of semiconductor materials, by Wendy L. Sarney
- The structure of secondary 2-azidoethanamines, a hypergolic fuel vs. a nonhypergolic fuel, Michael J. McQuaid
- Time-accurate simulations of synthetic jet-based flow control for an axisymmetric spinning body, Jubaraj Sahu
- The high level architecture functional class middleware (HLAfc) technical introduction, by Geoffrey C. Sauerborn
- Review of soviet/Russian literature on residual stress development in filament-wound ploymer-matrix composites, by Eric D. Wetzel and Scott R. White
- Spin-yaw lockin of an elastic finned projectile, Charles H. Murphy and William H. Mermagen, Sr
Outgoing Resources
- Provider agent1
- Provider place1