Stirling engines
Focus
1
Label
Stirling engines
Name
Stirling engines
Actions
Incoming Resources
- Subject of35
- Stirling convertor extended operation testing and data analysis at Glenn Research Center, Peggy A. Cornell [and others] ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009
- The next great thing, the sun, the Stirling engine, and the drive to change the world, Mark L. Shelton
- Comparison of conceptual designs for 25 KWe advanced Stirling conversion systems for dish electric applications, Richard K. Shaltens and Jeffrey G. Schreiber
- Development of a linear Stirling system model with varying heat inputs, Timothy F. Regan and Edward J. Lewandowski ; prepared for the Fifth International Energy Conversion Engineering Conference and Exhibit (IECEC) sponsored by the American Institute of Aeronautics and Astronautics St. Louis, Missouri, June 25-27, 2007
- Supporting technology at GRC to mitigate risk as Stirling power conversion transitions to flight, Jeffrey G. Schreiber, Lanny G. Thieme, and Wayne A. Wong ; prepared for the Sixth International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Cleveland, Ohio, July 28-30, 2008
- On the need for multidimensional Stirling simulations, Rodger W. Dyson [and others] ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Summary of Test Results From a 1 kWe-class free-piston Stirling power convertor integrated with a pumped NaK loop, Maxwell H. Briggs [and others] ; prepared for the 8th International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010
- Recent advances in power conversion and heat rejection technology for fission surface power, Lee Mason ; prepared for the Nuclear and Emerging Technologies for Space (NETS-2009) cosponsored by ANS and AIAA, Atlanta, Georgia, June 14-18, 2009
- Overview of NASA multi-dimensional stirling convertor code development and validation effort, Roy C. Tew [and others]
- Fast whole-engine Stirling analysis, Rodger W. Dyson [and others] ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Extended operation of Stirling convertors in a thermal vacuum environment, Salvatore M. Oriti ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Friction factor characterization for high-porosity random fiber regenerators, Lanny G. Thieme
- Lunar Surface Stirling power systems using isotope heat sources, Paul C. Schmitz, L. Barry Penswick, Richard K. Shaltens ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009
- Test rack development for extended operation of advanced stirling convertors at NASA Glenn Research Center, Gina M. Dugala
- Test results from a high power linear alternator test rig, Arthur G. Birchenough and David S. Hervol, Brent G. Gardner ; prepared for the 8th International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010
- Recent Stirling conversion technology developments and operational measurements at NASA Glenn Research Center, Salvatore M. Oriti and Nicholas A. Schifer ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009
- Experimental creep life assessment for the Advanced Stirling Convertor heater head, David L. Krause [and others] ; prepared for the Eight International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010
- Utilizing radioisotope power system waste heat for spacecraft thermal management, David R. Pantano [and others] ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Development of a Stirling System Dynamic Model with enhanced thermodynamics, Timothy F. Regan and Edward J. Lewandowski ; prepared for the Space Technology and Applications International Forum (STAIF-2005) sponsored by the University of New Mexico's Institute for Space and Nuclear Power Studies (UNM-ISNPS), Albuquerque, New Mexico, February 13-17, 2005
- Stirling analysis comparison of commercial versus high-order methods, Rodger W. Dyson [and others] ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Material studies related to the use of NaK heat exchangers coupled to stirling heater heads, Ivan E. Locci [and others]
- Investigation of liquid metal heat exchanger designs for fission surface power, Rodger W. Dyson [and others] ; prepared for the Sixth International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Cleveland, Ohio, July 28-30, 2008
- Fuel from the sky, solar power's potential for Western energy supply, Arnold Leitner
- An overview and status of NASA's radioisotope power conversion technology NRA, David J. Anderson, Wayne A. Wong, and Karen L. Tuttle ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Stirling convertor control for a concept rover at NASA Glenn Research Center, Gina M. Blaze-Dugala ; prepared for the Sixth International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Cleveland, Ohio, July 28-30, 2008
- Free-piston Stirling power conversion unit for fission surface power, phase I final report, J. Gary Wood [and others]
- Design of a facility to test the advanced Stirling Radioisotope Generator Engineering Unit, Edward J. Lewandowski [and others] ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009
- CFD modeling of free-piston Stirling engines, Mounir B. Ibrahim [and others]
- A design of a modular GPHS-Stirling power system for a Lunar habitation module, Paul C. Schmitz, L. Barry Penswick, Richard K. Shaltens ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Summary of Stirling convertor testing at NASA Glenn Research Center, Jeffrey G. Schreiber ; prepared for the Fourth International Energy Conversion Engineering Conference and Exhibit (IECEC) sponsored by the American Institute of Aeronautics and Astronautics San Diego, California, June 26-29, 2006
- Initial characterization of a modular heat exchanger with an integral heat pipe, Jeffrey G. Screiber
- NASA radioisotope power conversion technology NRA overview, David J. Anderson ; prepared for the Space Technology and Applications International Forum (STAIF-2005) sponsored by the University of New Mexico's Institute for Space and Nuclear Power Studies (UNM-ISNPS), Albuquerque, New Mexico, February 13-17, 2005
- Assessments of mechanical and life limiting properties of two candidate silicon nitrides for stirling convertor heater head applications, Sung R. Choi, David L. Krause
- Experimental assessment of advanced Stirling component concepts, B. Ziph
- A survey of oscillating flow in Stirling engine heat exchangers, Terrence W. Simon and Jorge R. Seume