George C. Marshall Space Flight Center
Label
George C. Marshall Space Flight Center
Name
George C. Marshall Space Flight Center
Actions
Incoming Resources
- Sources and transportation of bulk, low-cost lunar simulants materials, D.L. Rickman
- NASA/MSFC FY88 Global Scale Atmospheric Processes Research Program review, edited by G. S. Wilson, F. W. Leslie, and J. E. Arnold
- Hall station and camera system operation and maintenance manual, by Andrew J. Piekutowski, Edward A. Strader
- Monodisperse latex reactor (MLR), a materials processing space shuttle mid-deck payload, by Dale M. Kornfeld
- The effect of a small initial curvature on the free vibration of clamped, rectangular plates, interim report, by A. A. Adeniji-Fashola and A. A. Oyediran
- Replacement of hydrochlorofluorocarbon-225 solvent for cleaning and verification sampling of NASA propulsion oxygen systems hardware, ground support equipment, and associated test systems, H.D. Burns [and eight others]
- Test report for MSFC test #83-2, pressure scaled water impact test of a 12.5 inch diameter model of the space shuttle solid rocket booster filament wound case and external TVC POD
- The MSFC/J70 orbital atmosphere model and the data bases for the MSFC solar activity prediction technique, Dale L. Johnson and Robert E. Smith
- High-performance deployable structures for the support of high-concentration ratio solar array models, final report, by Mehran Mobrem ; prepared by Astro Aerospace Corporation
- Theory of CW lidar aerosol backscatter measurements and development of a 2.1-[mu]m solid-state pulsed laser radar for aerosol backscatter profiling, M.J. Kavaya, S.W. Henderson, and R.G. Frehlich
- A damage resistance comparison between candidate polymer matrix composite feedline materials, A.T. Nettles
- Combustion of lox with H₂₍g₎ under subcritical, critical and supercritical conditions (task 1) and experimental observation of dense spray and mixing of impinging jets (task 2), semi-annual report, prepared by K.K. Kou ... [and others
- The 1996 NASA Aerospace Battery Workshop, proceedings of a workshop, sponsored by the NASA Aerospace Flight Battery Systems Program, held Huntsville, Alabama, December 3-5, 1996 ; compiled by J.C. Brewer
- Wide field x-ray telescope mission concept study results, R.C. Hopkins [and eight others]
- Space platform expendables resupply concept definition study
- Analytical round robin for elastic-plastic analysis of surface cracked plates, phase I results, D. N. Wells and P. A. Allen
- The interstellar probe (ISP), pre-perihelion trajectories and application of holography, G.L. Matloff [and others]
- Design and fabrication of a tank-applied broad area cooling shield coupon, J.J. Wood and M.R. Middlemas
- Selected tether applications in space, phase 2, final report
- Fluid acquisition and resupply experiments on space shuttle flights STS-53 and STS-57, S.M. Dominick [and others]
- Payload missions integration progress report, August 11, 1983, through September 16, 1983 (WBS 05.01)
- Development and analysis of cold trap for use in fission surface power-primary test circuit, T. M. Wolfe [and three others]
- Development of a qualification standard for adhesives used in hybrid microcircuits, J.J. Licari, B.L. Weigand, and C.A. Soykin
- Mars transportation environment definition document, M. Alexander, editor
- High-speed observer, automated streak detection for the aerospike engine, T.J. Rieckhoff, M.A. Covan and J.M. O'Farrell
- Definition and preliminary design of the Laser Atmospheric Wind Sounder, LAWS, phase I, final report
- Marshall Space Flight Center 1960-1985, 25 anniversary report
- Executive summary, satellite servicing economic study
- On the relationship between the length of season and tropical cyclone activity in the North Atlantic basin during the weather satellite era, 1960-2013, Robert M. Wilson
- The effects of foam thermal protection system on the damage tolerance characteristics of composite sandwich structures for launch vehicles, A.T. Nettles, A.J. Hodge, and J.R. Jackson
- Effect of flange bolt preload on space shuttle main engine high pressure oxidizer turbopump housing analysis, by J.B. Min, L.M. Johnston, and B. Czekalski
- Space telescope, design development mockup, prepared by Edwin C. Pruett [and three others]
- Particle shape and composition of NU-LHT-2M, D.L. Rickman, H. Lowers
- General public space travel and tourism, Daniel O'Neil, compiler ; Ivan Bekey [and others]
- Laser-photodetector timing station instruction and maintenance manual, by Edward A. Strader
- Photographic analysis technique for assessing external tank foam loss events, T.J. Rieckhoff, M. Covan, J.M. O'Farrell
- Gamma ray astronomy, final report, July 13, 1989-January 12, 1991, prepared by William S. Paciesas ; prepared for George C. Marshall Space Flight Center ... submitted by Department of Physics, The University of Alabama in Huntsville
- Feasibility study and verified design concept for new improved hot gas facility, final report, prepared by Lockheed Missiles & Space Company, Inc
- Refractory metal heat pipe life test, test plan and standard operating procedures, J.J. Martin and R.S. Reid
- Figure of merit characteristics compared to engineering parameters, C.M. Schrader, D.L. Rickman
- Mars Global Reference Atmospheric Model 2001 Version (Mars-GRAM 2001), users guide, C.G. Justus, D.L. Johnson
- Comparison of two computer codes for crack growth analysis, NASCRAC versus NASA/FLAGRO, by R. Stallworth, C.A. Meyers, and H.C. Stinson
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II), quarterly report # 2, for the period 22 June 1985 through 21 September 1985, principal investigator Enrico Lorenzini ; co-investigators David A. Arnold, Mario D. Grossi, Gordon E. Gullahorn
- Laser ablation cleaning of self-reacting friction stir weld seam surfaces, a preliminary evaluation, A.C. Nunes, Jr. [and four others]
- Liquid acquisition device design sensitivity study, M.K. Van Dyke, L.J. Hastings
- Adventures in rocket science
- Microcoil spring interconnects for ceramic grid array integrated circuits, S.M. Strickland [and others]
- Atmospheric environment for Space Shuttle (STS-9) launch, by D.L. Johnson, C.K. Hill and G.W. Batts
- Manufacture of lunar regolith simulants, D.L. Rickman [and four others]
- Emergency management computer-aided trainer (EMCAT), final report, prepared by Ricardo C. Rodriguez, Randall P. Johnson
- Focus of4
- Author of1
- Sources and transportation of bulk, low-cost lunar simulants materials, D.L. Rickman
- Analysis of fluorinated polyimides flown on the Materials International Space Station Experiment, M.M. Finckenor, L. Rodman and B. Farmer
- Design and fabrication of a tank-applied broad area cooling shield coupon, J.J. Wood and M.R. Middlemas
- Wide field x-ray telescope mission concept study results, R.C. Hopkins [and eight others]
- Development and analysis of cold trap for use in fission surface power-primary test circuit, T. M. Wolfe [and three others]
- On the relationship between the length of season and tropical cyclone activity in the North Atlantic basin during the weather satellite era, 1960-2013, Robert M. Wilson
- Systematic destruction of electronic parts for aid in electronic failure analysis, S.E. Decker, T.D. Rolin, and P.D. McManus
- Laser ablation cleaning of self-reacting friction stir weld seam surfaces, a preliminary evaluation, A.C. Nunes, Jr. [and four others]
- Compact fuel element environment test, D.E. Bradley [and three others]
- Materials Research in Microgravity 2012, R. Hyers, editor [and six others] ; M. SanSoucie, compiler
- Lead-free experiment in a space environment, J.F. Blanche, S.M. Strickland
- Magnetic flux compression experiments using plasma armatures, M.W. Turner and C.W. Hawk, R.J. Litchford
- Manufacture of lunar regolith simulants, D.L. Rickman [and four others]
- Atmospheric environment for Space Shuttle (STS-9) launch, by D.L. Johnson, C.K. Hill and G.W. Batts
- Liquid acquisition device design sensitivity study, M.K. Van Dyke, L.J. Hastings
- Comparison of the variations of sunspot number, number of sunspot groups, and sunspot area, 1875-2013, Robert M. Wilson
- Tribology experiment in zero gravity, C.H.T. Pan [and three others]
- New atmospheric sensor analysis study, prepared by K.G. Parker
- Effects of fusion tack welds on self-reacting friction stir welds, A.C. Nunes, Jr. [and three others]
- On the trend of the annual mean, maximum, and minimum temperature and the diurnal temperature range in the Armagh Observatory, Northern Ireland, Dataset, 1844-2012, Robert M. Wilson
- Optical properties of nanosatellite hardware, M.M. Finckenor and R.F. Coker
- Analysis and derivation of allocations for fiber contaminants in liquid bipropellant systems, N.M. Lowrey, K.Y. Ibrahim
- Cryogenic propellant storage and transfer technology demonstration, prephase a government point-of-departure concept study, J.A. Mulqueen [and sixteen others]
- Elements of engineering excellence, J.C. Blair, R.S. Ryan, and L.A. Schutzenhofer
- Analysis of International Space Station vehicle materials exposed on Materials International Space Station Experiment from 2001 to 2011, M.M. Finckenor, J.L. Golden and M. Kravchenko
- The NASA Marshall Space Flight Center Earth global reference atmospheric model, 2010 version, F.W. Leslie, C.G. Justus
- Statistical aspects of North Atlantic basin tropical cyclones during the weather satellite era, 1960-2013, Robert M. Wilson
- Replacement of hydrochlorofluorocarbon-225 solvent for cleaning and verification sampling of NASA propulsion oxygen systems hardware, ground support equipment, and associated test systems, H.D. Burns [and eight others]
- Meteoroids, the smallest solar system bodies, W.J. Cooke, sponsor ; D.E. Moser and B.F. Hardin, compilers, D. Janches, compiler
- Atmosphere resource recovery and environmental monitoring trace contaminant control through FY 2012, J.L. Perry [and three others]
- Elastic-plastic J-integral solutions for surface cracks in tension using an interpolation methodology, P.A. Allen and D.N. Wells
- Stress corrosion evaluation of various metallic materials for the International Space Station water recycling system, P.D. Torres
- Normalization of impact energy by laminate thickness for compression after impact testing, A.T. Nettles and S.M. Hromisin
- On the relationship between global land-ocean temperature and various descriptors of solar-geomagnetic activity and climate, Robert M. Wilson
- Mars global reference atmospheric model 2010 version users guide, H.L. Justh
- Generalized Fluid System Simulation Program, version 6.0, A.K. Majundar [and three others]
- Results of lunar impact observations during Geminid meteor shower events, R.J Suggs and R.M. Suggs
- Space station systems technology study, (add-on task) final report
- Advanced materials for exploration task research results, compiled by M.B. Cook, K.L. Murphy, T. Schneider
- Closeout report for the refractory metal accelerated heat pipe life test activity, J. Martin [and four others]
- Nonlinear rotordynamics analysis, prepared by William B. Day
- Estimating the length of the North Atlantic basin hurricane season, Robert M. Wilson
- Beneficiation of Stillwater Complex rock for the production of lunar simulants, D.L. Rickman [and three others]
- Large-scale liquid hydrogen tank rapid chill and fill testing for the advanced shuttle upper stage concept, R.H. Flachbart [and six others]
- A variational assimilation method for satellite and conventional data, development of basic model for diagnosis of cyclone systems, G.L. Achtemeier [and six others]
- Missile aerodynamics for ascent and re-entry, G.L. Watts, J.W. McCarter
- Solar thermal upper stage liquid hydrogen pressure control testing and analytical modeling, A.D. Olsen [and eight others]
- Multiphysics modeling of an annular linear induction pump with applications to space nuclear power systems, J. Kilbane and K.A. Polzin
- On the sizes of the North Atlantic Basin tropical cyclones based on 34- and 64-kt wind radii data, 2004-2013, Robert M. Wilson
- Testing of an annular linear induction pump for the fission surface power technology demonstration unit, K.A. Polin [and four others]
- inverse.sponsoringbody10
- Selected tether applications in space, phase 2, final report
- Space telescope, design development mockup, prepared by Edwin C. Pruett [and three others]
- Measurement of damping of graphite epoxy materials, M. J. Crocker
- Field joint protection system rain qualification, prepared by M. Cook
- Study of basic physical processes in liquid rocket engines, by S.T. Wu and C.P. Chen
- Power subsystem automation study, prepared by M.S. Imamura, R.L. Moser, and M. Veatch
- The investigation of tethered satellite system dynamics, principal investigator, Enrico Lorenzini, co-investigators, David A. Arnold [and four others]
- Atmospheric planetary-wave response to external forcing, principal investigator: Duane E. Stevens; co-investigator: Elmar R. Reiter
- Advanced Solar Observatory (ASO) accommodations requirements study, prepared by A. B. C. Walker
- Analysis of the NASA/MSFC Airborne Doppler Lidar results from San Gorgonio Pass California, W.C. Cliff [and three others]