Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010
Resource Information
The event Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010 represents a publication, printing, distribution, issue, release or production of resources found in Public Libraries of Suffolk County, New York.
The Resource
Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010
Resource Information
The event Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010 represents a publication, printing, distribution, issue, release or production of resources found in Public Libraries of Suffolk County, New York.
- Label
- Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010
- Provider date
- 2010
194 Items that share the ProviderEvent Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010
Context
Context of Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010Publication of
No resources found
No enriched resources found
- A comparison of flow-through versus non-flow-through proton exchange membrane fuel cell systems for NASA's exploration missions, Mark A. Hoberecht, (electronic resource)
- A data filter for identifying steady-state operating points in engine flight data for condition monitoring applications, Donald L. Simon and Jonathan S. Litt ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- A densified liquid methane delivery system for the Altair ascent stage, Thomas M. Tomsik [and others], (electronic resource)
- A heat transfer investigation of liquid and two-phase methane, Jonathan Van Noord ; prepared for the 57th Joint Army-Navy-NASA-Air Force (JANNAF) Propulsion Meeting sponsored by the JANNAF Interagency Propulsion Committee, Colorado Springs, Colorado, May 3-7, 2010, (electronic resource)
- A high-fidelity simulation of a generic commercial aircraft engine and controller, Ryan D. May [and others] ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- A mass computation model for lightweight Brayton cycle regenerator heat exchangers, Albert J. Juhasz ; prepared for the 8th International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- A new analysis tool assessment for rotordynamic modeling of gas foil bearings, Samuel A. Howard, Luis San Andres ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- A new approach for constructing highly stable high order CESE schemes, Sin-Chung Chang ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- A new narrowbeam, multi-frequency scanning radiometer and its application to in-flight icing detection, David J. Serke [and others], (electronic resource)
- A review of discrete element method (DEM) particle shapes and size distributions for lunar soil, John E. Lane, Philip T. Metzger, R. Allen Wilkinson, (electronic resource)
- A risk assessment architecture for enhanced engine operation, Jonathan S. Litt, Lauren M. Sharp, and Ten-Huei Guo ; prepared for the Infotech@Aerospace 2010 Conference sponsored by the American Institute of Aeronautics and Astronautics, Atlanta, Georgia, April 20-22, 2010, (electronic resource)
- A simplified model for detonation based pressure-gain combustors, Daniel E. Paxson ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- A study on advanced lithium-based battery cell chemistries to enhance Lunar exploration missions, Concha M. Reid, William R. Bennett, (electronic resource)
- A systematic approach for model-based aircraft engine performance estimation, Donald L. Simon and Sanjay Garg ; prepared for the Infotech@Aerospace (I@A) Conference sponsored by the American Institute of Aeronautics and Astronautics, Seattle, Washington, April 6-9, 2009, (electronic resource)
- ACT payload shroud structural concept analysis and optimization, Bart F. Zalewski, Brett A. Bednarcyk ; prepared for the 16th U.S. National Congress on Theoretical and Applied Mechanics (USNCTAM) sponsored by the U.S. Committee on Theoretical and Applied Mechanics, University Park, Pennsylvania, June 27-July 2, 2010, (electronic resource)
- Acoustic performance of novel fan noise reduction technologies for a high bypass model turbofan at simulated flight conditions, David M. Elliott, Richard P. Woodward, and Gary G. Podboy ; prepared for the 15th Aeroacoustics Conference (30th Aeroacoustics Conference) cosponsored by AIAA and CEAS Miami, Florida, May 11-13, 2009, (electronic resource)
- Advancements toward oil-free rotorcraft propulsion, Samuel A. Howard and Robert J. Bruckner, Kevin C. Radil, (electronic resource)
- Aero-thermal calibration of the NASA Glenn Icing Research Tunnel (2004 and 2005 tests), E. Allen Arrington [and others], (electronic resource)
- Aerodynamic design and computational analysis of a spacecraft cabin ventilation fan, Daniel L. Tweedt, (electronic resource)
- Aeroelastic computations of a compressor stage using the harmonic balance method, T.S.R. Reddy, Milind A. Bakhle ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-5, 2009, (electronic resource)
- An analytical assessment of NASA's N+1 Subsonic Fixed Wing Project noise goal, Jeffrey J. Berton and Edmane Envia, Casey L. Burley ; prepared for the 15th AIAA/CEAS Aeronautics Conference (30th AIAA Aeronautics Conference) sponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Miami, Florida, May 11-13, 2009, (electronic resource)
- An assessment of gas foil bearing scalability and the potential benefits to civilian turbofan engines, Robert J. Bruckner ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers, Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- An experimental investigation of silicone-to-metal bond strength in composite space docking system seals, Mason C. Conrad, Christopher C. Daniels and Marta B. Bastrzyk ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-5, 2009, (electronic resource)
- An experimental study of fan inflow distortion tone noise, L. Danielle Koch ; prepared for the 15th Aeroacoustics Conference (30th Aeroacoustics Conference) sponsored by the American Institute of Aeronautics and Astronautics and Council of European Aerospace Societies, Miami, Florida, May 11-13, 2009, (electronic resource)
- An integrated architecture for on-board aircraft engine performance trend monitoring and gas path fault diagnostics, Donald L. Simon ; prepared for the 57th Joint Army-Navy-NASA-Air Force (JANNAF) Propulsion Meeting sponsored by the JANNAF Interagency Propulsion Committee, Colorado Springs, Colorado, May 3-7, 2010, (electronic resource)
- Analysis of apex seal friction power loss in rotary engines, Robert F. Handschuh, A. Karl Owen, (electronic resource)
- Analysis of the STS-126 flow control valve structural-acoustic coupling failure, Trevor M. Jones, Jeffrey M. Larko, and Mark E. McNelis, (electronic resource)
- Application of diagnostic analysis tools to the Ares I thrust vector control system, William A. Maul [and others] ; prepared for the Infotech@Aerospace 2010 Conference sponsored by the American Institute of Aeronautics and Astronautics, Atlanta, Georgia, April 20-22, 2010, (electronic resource)
- Application of the NEXT ion thruster lifetime assessment to thruster throttling, Jonathan L. Van Noord, Daniel A. Herman ; prepared for the 44th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Hartford, Connecticut, July 21-23, 2008, (electronic resource)
- Approach to in situ Component Level Electronics Assembly Repair (CLEAR) for Constellation, Peter M. Struk and Richard C. Oeftering ; prepared for the Space 2009 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics, Pasadena, California, September 14-17, 2009, (electronic resource)
- Assessment of aerodynamic challenges of a variable-speed power turbine for large civil tilt-rotor application, Gerard E. Welch ; prepared for the 66th Annual Forum and Technology Display (AHS Forum 66) sponsored by the American Helicopter Society, Phoenix, Arizona, May 11-13, 2010, (electronic resource)
- Assessment of the state of the art of flight control technologies as applicable to adverse conditions, Mary S. Reveley [and others], (electronic resource)
- Assessment of the state of the art of integrated vehicle health management technologies as applicable to damage conditions, Mary S. Reveley [and others], (electronic resource)
- Atmospheric turbulence modeling for aero vehicles : fractional order fits, George Kopasakis, (electronic resource)
- Back-face strain for monitoring stable crack extension in precracked flexure specimens, Jonathan A. Salem and Louis J. Ghosn, (electronic resource)
- Blast loading of epoxy panels using a shock tube, Mark Pankow and Anthony M. Waas, Brett Bednarcyk, (electronic resource)
- Broadband fan noise prediction system for turbofan engines, Bruce L. Morin, (electronic resource)
- C-band airport surface communications system standards development, phase I, final report, Edward Hall [and others], (electronic resource)
- COMPASS final report : Lunar Communications Terminal (LCT), Steven R. Oleson and Melissa L. McGuire, (electronic resource)
- COMPASS final report : low cost Robotic Lunar Lander, Melissa L. McGuire and Steven R. Oleson, (electronic resource)
- Calibration for thrust and airflow measurements in the CE-22 Advanced Nozzle Test Facility, Roger A. Werner and John D. Wolter, (electronic resource)
- Causal factors and adverse conditions of aviation accidents and incidents related to integrated resilient aircraft control, Mary S. Reveley [and others], (electronic resource)
- Closed Brayton Cycle power conversion unit for fission surface power, phase I final report, Robert L. Fuller, (electronic resource)
- Closed-loop simulation study of the Ares I upper stage thrust vector control subsystem for nominal and failure scenarios, Amy Chicatelli [and others], (electronic resource)
- Comparing spray characteristics from Reynolds Averaged Navier-Stokes (RANS) National Combustion Code (NCC) calculations against experimental data for a turbulent reacting flow, Anthony C. Iannetti and Jeffery P. Moder ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- Computational Fluid Dynamics (CFD) simulations of jet mixing in tanks of different scales, Kevin Breisacher and Jeffrey Moder ; prepared for the 57th Joint Army-Navy-NASA-Air Force (JANNAF) Propulsion Meeting sponsored by the JANNAF Interagency Propulsion Committee, Colorado Springs, Colorado, May 3-7, 2010, (electronic resource)
- Computational aerodynamic simulations of a spacecraft cabin ventilation fan design, Daniel L. Tweedt, (electronic resource)
- Computational fluid dynamics (CFD) simulation of hypersonic turbine-based combined-cycle (TBCC) inlet mode transition, John W. Slater and John D. Saunders ; prepared for the 16th International Space Planes and Hypersonic Systems and Technologies Conference cosponsored by the AIAA, DLR, and DGLR, Bremen, Germany, October 19-22, 2009, (electronic resource)
- Conservational PDF equations of turbulence, Tsan-Hsing Shih, Nan-Suey Liu, (electronic resource)
- Control activity in support of NASA Turbine Based Combined Cycle (TBCC) research, Thomas J. Stueber [and others], (electronic resource)
- Cryogenic propellant management device conceptual design study, Mark Wollen [and others], (electronic resource)
- Data quality assurance for supersonic jet noise measurements, Clifford A. Brown, Brenda S. Henderson, and James E. Bridges ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Defining an abrasion index for lunar surface systems as a function of dust interaction modes and variable concentration zones, Ryan L. Kobrick and David M. Klaus, Kenneth W. Street, Jr. ; prepared for the Lunar Dust, Plasma and Atmosphere: The Next Steps sponsored by the University of Colorado, Boulder, Colorado, January 27-29, 2010, (electronic resource)
- Design and implementation of a characterization test rig for evaluating high bandwidth liquid fuel flow modulators, Joseph R. Saus [and others] ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-5, 2009, (electronic resource)
- Design of a facility to test the advanced Stirling Radioisotope Generator Engineering Unit, Edward J. Lewandowski [and others] ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009, (electronic resource)
- Development and demonstration of a computational tool for the analysis of particle vitiation effects in hypersonic propulsion test facilities, Hugh Douglas Perkins, (electronic resource)
- Development and life prediction of erosion resistant turbine low conductivity thermal barrier coatings, Dongming Zhu, Robert A. Miller, and Maria A. Kuczmarski ; prepared for the 65th Annual Forum and Technology Display sponsored by the American Helicopter Society, Grapevine, Texas, May 27-29, 2009, (electronic resource)
- Development and testing of an ultracapacitor based uninterruptible power supply (UPS) system, Dennis J. Eichenberg, (electronic resource)
- Development of passive fuel cell thermal management heat exchanger, Kenneth A. Burke, Ian J. Jakupca and Anthony J. Colozza, (electronic resource)
- Development of passive fuel cell thermal management technology, Kenneth A. Burke, Ian Jakupca and Anthony Colozza ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009, (electronic resource)
- Direct electricity from heat : a solution to assist aircraft power demands, Jon C. Goldsby, (electronic resource)
- Directivity of a sparse array in the presence of atmospheric-induced phase fluctuations for deep space communications, James A. Nessel and Roberto J. Acosta, (electronic resource)
- Double helical gear performance results in high speed gear trains, Robert F. Handschuh [and others] ; prepared for the 65th Annual Forum and Technology Display (AHS Forum 65) sponsored by the American Helicopter Society, Grapevine, Texas, May 27-29, 2009, (electronic resource)
- Effect of microstructural parameters on the relative densities of metal foams, S.V. Raj, Jacob A. Kerr, (electronic resource)
- Effect of simulant type on the absorptance and emittance of dusted thermal control surfaces in a simulated Lunar environment, James R. Gaier ; prepared for the 40th International Conference on Environmental Systems cosponsored by AIAA, AIChE, ASME, SAE Environmental Systems Committee, and the ICES International Committee, Barcelona, Spain, July 11-15, 2010, (electronic resource)
- Effect of turbulence modeling on an excited jet, Clifford A. Brown, Ray Hixon ; prepared for the 15th Aeroacoustics Conference (30th AIAA Aeroacoustics Conference) cosponsored by AIAA and CEAS, Miami, Florida, May 11-13, 2009, (electronic resource)
- Effective presentation of metabolic rate information for lunar Extravehicular Activity (EVA), Michael A. Mackin, Philip Gonia, and José Lombay-Gonzalez, (electronic resource)
- Effects of gas turbine component performance on engine and rotary wing vehicle size and performance, Christopher A. Snyder, Douglas R. Thurman ; prepared for the 66th Annual Forum and Technology Display (AHS Forum 66) sponsored by the American Helicopter Society, Phoenix, Arizona, May 11-13, 2010, (electronic resource)
- Effects of hydrocarbon-based grease on rapid prototype material used for grease retention shrouds, Andrew J. Zakrajsek, Daniel J. Valco, and Kenneth W. Street, Jr, (electronic resource)
- Engagement of metal debris into a gear mesh, Robert F. Handschuh and Timothy L. Krantz ; prepared for the International Conference on Motion and Power Transmissions (MPT2009-Sendai) sponsored by the Machine Design and Tribology Division of the Japan Society of Mechanical Engineers, Sendai, Japan, May 13-15, 2009, (electronic resource)
- Error Control with perfectly matched layer or damping layer treatments for computational aeroacoustics with jet flows, John W. Goodrich ; prepared for the 15th Aeroacoustics Conference (30th AIAA Aeroacoustics Conference) cosponsored by AIAA and CEAS, Miami, Florida, May 11-13, 2009, (electronic resource)
- Establishing a robotic, LEO-to-GEO satellite servicing infrastructure as an economic foundation for exploration, Gary A.P. Horsham and George R. Schmidt, James H. Gilland ; prepared for the Space 2010 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics, Anaheim, California, August 30 to September 2, 2010, (electronic resource)
- Evaluating the Acoustic effect of over-the-rotor Foam-Metal Liner installed on a low speed fan using Virtual Rotating Microphone imaging, Daniel L. Sutliff, Robert P. Dougherty, Bruce E. Walker ; prepared for the 16th Aeroacoustics Conference cosponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Stockholm, Sweden, June 7-9, 2010, (electronic resource)
- Evaluation of ultrasonic and thermal nondestructive evaluation for the characterization of aging degradation in braided composite materials, Richard E. Martin, (electronic resource)
- Experimental creep life assessment for the Advanced Stirling Convertor heater head, David L. Krause [and others] ; prepared for the Eight International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Experimental investigation of forces produced by misaligned steel rollers, Timothy Krantz and Christopher DellaCorte, Michael Dube ; prepared for the 40th Aerospace Mechanisms Symposium cosponsored by the NASA Kennedy Space Center and Lockheed Martin Space Systems Company, Cocoa Beach, Florida, May 12-14, 2010, (electronic resource)
- Experimental lithium-ion battery developed for demonstration at the 2007 NASA Desert Research and Technology Studies (D-RATS) program, William R. Bennett and Richard S. Baldwin, (electronic resource)
- Experimental methodology for determining turbomachinery blade damping using magnetic bearing excitation and non-contacting optical measurements, Andrew J. Provenza, Kirsten P. Duffy ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Experimental techniques for evaluating the effects of aging on impact and high strain rate properties of triaxial braided composite materials, J. Michael Pereira [and others] ; prepared for the 2010 Aircraft Airworthiness and Sustainment (AA&S) Conference cosponsored by the DoD, NASA, and FAA, Austin, Texas, May 10-13, 2010, (electronic resource)
- Extraction and characterization of lipids from Salicornia virginica and Salicornia europaea, Michael J. Kulis [and others], (electronic resource)
- Extraction of thermal performance values from samples in the lunar dust adhesion bell jar, James R. Gaier and John Siamidis, Elizabeth M.G. Larkin ; prepared for the 25th Space Simulation Conference cosponsored by the IEST, NASA, AIAA, ASTM, CSA, and JHU/APL, Annapolis, Maryland, October 20-23, 2008, (electronic resource)
- Final report for the advanced concept studies for supersonic commercial transports entering service in the 2030 to 2035 period, N+3 Supersonic Program, John Morgenstern [and others], (electronic resource)
- Finite element model for failure study of two-dimensional triaxially braided composite, Xuetao Li and Wieslaw K. Binienda, Robert K. Goldberg, (electronic resource)
- Fission Surface Power System initial concept definition, (electronic resource)
- Fission surface power technology development status, Donald T. Palac [and others] ; prepared for the Space 2009 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics Pasadena, California, September 14-17, 2009, (electronic resource)
- Free-piston Stirling power conversion unit for fission surface power, phase I final report, J. Gary Wood [and others], (electronic resource)
- Full-scale system for quantifying loads and leak rates of seals for space applications, Patrick H. Dunlap, Jr. [and others] ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- GLobal Integrated Design Environment (GLIDE) : a concurrent engineering application, Melissa L. McGuire, Matthew R. Kunkel and David A. Smith, (electronic resource)
- Gas turbine characteristics for a large civil tilt-rotor (LCTR), Christopher A. Snyder, Douglas R. Thurman ; prepared for the 65th Annual Forum and Technology Display (AHS Forum 65) sponsored by the American Helicopter Society, Grapevine, Texas, May 27-29, 2009, (electronic resource)
- Grain boundary engineering the mechanical properties of Allvac 718Plus[trademark symbol] superalloy, Timothy P. Gabb [and others], (electronic resource)
- Harmonic balance computations of fan aeroelastic stability, Milind A. Bakhle, T.S.R. Reddy ; prepared for the International Forum on Aeroelasticity and Structural Dynamics (IFASD 2009) cosponsored by CEAS and AIAA, Seattle, Washington, June 21-25, 2009, (electronic resource)
- Heat entrapment effects within liquid acquisition devices, W.M.B. Duval, D.J. Chato, and M.P. Doherty ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- Heating-rate-coupled model for hydrogen reduction of JSC-1A, U. Hegde and R. Balasubramaniam, S.A. Gokoglu ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics Orlando, Florida, January 4-7, 2010, (electronic resource)
- High pressure angle gears : preliminary testing results, Robert F. Handschuh and Andrew J. Zakrajsek, (electronic resource)
- High pressure electrolyzer system evaluation, Kevin Prokopius and Anthony Colozza, (electronic resource)
- Hypervelocity impact of unstressed and stressed titanium in a Whipple configuration in support of the Orion Crew Exploration Vehicle Service Module propellant tanks, Henry K. Nahra [and others] ; prepared for the 11th Hypervelocity Impact Symposium 2010 sponsored by the Hypervelocity Impact Society, Freiburg, Germany, April 11-15, 2010, (electronic resource)
- Inlet flow control and prediction technologies for embedded propulsion systems : summary report for fiscal year 2009, Michelle L. McMillan [and others], (electronic resource)
- Integration assessment of visiting vehicle induced electrical charging of the International Space Station structure, Leonard Kramer, Thomas W. Kerslake and Joel T. Galofaro ; prepared for the 11th Spacecraft Charging Technology Conference cosponsored by the Goembel Instruments, SAIC, and Space Systems Loral, Albuquerque, New Mexico, September 20-24, 2010, (electronic resource)
- Integration methodology for oil-free shaft support systems : four steps to success, Samuel A. Howard, Christopher DellaCorte, and Robert J. Bruckner ; prepared for the 8th International Conference on Rotor Dynamics sponsored by the International Federation for the Promotion of Mechanism and Machine Science (IFToMM), September 12-15, 2010, Seoul, Korea, (electronic resource)
- Interference-fit life factors for ball bearings, Fred B. Oswald and Erwin V. Zaretsky, Joseph V. Poplawski, (electronic resource)
- Interplanetary mission design handbook : Earth-to-Mars mission opportunities 2026 to 2045, Laura M. Burke, Robert D. Falck, and Melissa L. McGuire, (electronic resource)
- Investigation of a macromechanical approach to analyzing triaxially-braided polymer composites, Robert K. Goldberg, Brina J. Blinzler and Wieslaw K. Binienda ; prepared for the 51st Structures, Structural Dynamics, and Materials Conference cosponsored by the AIAA, ASME, ASCE, AHS, and ASC, Orlando, Florida, April 12-15, 2010, (electronic resource)
- Jet noise reduction by microjets : a parametric study, K.B.M.Q. Zaman ; prepared for the 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference) cosponsored by AIAA and CEAS, Miami, Florida, May 11-13, 2009, (electronic resource)
- Jet noise scaling in dual stream nozzles, Abbas Khavaran, James Bridges ; prepared for the 16th Aeroacoustics Conference cosponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Stockholm, Sweden, June 7-9, 2010, (electronic resource)
- L-band digital aeronautical communications system engineering : concepts of use, systems performance, requirements, and architectures, Natalie Zelkin and Stephen Henriksen, (electronic resource)
- Lifetime assessment of the NEXT ion thruster, Jonathan L. Van Noord ; prepared for the 43rd Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Cincinnati, Ohio, July 8-11, 2007, (electronic resource)
- Liquid oxygen propellant densification production and performance test results with a large-scale flight-weight propellant tank for the X33 RLV, Thomas M. Tomsik and Michael L. Meyer, (electronic resource)
- Locating and quantifying broadband fan sources using in-duct microphones, Robert P. Dougherty, Bruce E. Walker, Daniel L. Sutliff ; prepared for the 16th Aeroacoustics Conference cosponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Stockholm, Sweden, June 7-9, 2010, (electronic resource)
- Loop Shaping control design for a supersonic propulsion system model using quantitative feedback theory (QFT) specifications and bounds, Joseph W. Connolly and George Kopasakis ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Lunar Surface Stirling power systems using isotope heat sources, Paul C. Schmitz, L. Barry Penswick, Richard K. Shaltens ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009, (electronic resource)
- MISSE 2 PEACE polymers experiment atomic oxygen erosion yield error analysis, Catherine E. McCarthy, Bruce A. Banks, Kim K. de Groh, (electronic resource)
- Measurement of the solar absorptance and thermal emittance of lunar simulants, James R. Gaier and Kenneth W. Street, Robert J. Gustafson ; prepared for the 40th International Conference on Environmental Systems cosponsored by AIAA, AIChE, ASME, SAE Environmental Systems Committee, and the ICES International Committee, Barcelona, Spain, July 11-15, 2010, (electronic resource)
- Measuring crack length in coarse grain ceramics, Jonathan A. Salem and Louis J. Ghosn, (electronic resource)
- Measuring thermodynamic properties of metals and alloys with Knudsen effusion mass spectrometry, Evan H. Copland, Nathan S. Jacobson, (electronic resource)
- Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams, S.V. Raj, (electronic resource)
- Microstructure modeling of third generation disk alloys : final report, Herng-Jeng Jou, (electronic resource)
- Modeling neutral densities downstream of a gridded ion thruster, George C. Soulas ; prepared for the 49th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Modeling progressive damage using local displacement discontinuities within the FEAMAC multiscale modeling framework, Vipul Ranatunga, Brett A. Bednarcyk and Steven M. Arnold ; prepared for the 51st Structures, Structural Dynamics, and Materials Conference cosponsored by AIAA, ASME, ASCE, AHS, and ASC, Orlando, Florida, April 12-15, 2010, (electronic resource)
- Modeling progressive failure of bonded joints using a single joint finite element, Scott E. Stapleton and Anthony M. Waas, Brett A. Bednarcyk ; prepared for the 51st Structures, Structural Dynamics, and Materials Conference cosponsored by the AIAA, ASME, ASCE, AHS, and ASC, Orlando, Florida, April 12-15, 2010, (electronic resource)
- Modeling vortex generators in the Wind-US Code, Julianne C. Dudek ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- Modification of a macromechanical finite-element based model for impact analysis of triaxially-braided composites, Robert K. Goldberg, Brina J. Blinzler and Wieslaw K. Binienda ; prepared for the 25th Annual Technical Conference cosponsored by the American Society for Composites (ASC) and the Japan Society for Composite Materials (JSCM), Dayton, Ohio, September 20-22, 2010, (electronic resource)
- Moisture-induced alumina scale spallation : the hydrogen factor, James L. Smialek, (electronic resource)
- Multiscale/multifunctional probabilistic composite fatigue, Christos C. Chamis, (electronic resource)
- NASA N+3 subsonic fixed wing silent efficient low-emissions commercial transport (SELECT) vehicle study, revision a, Sam Bruner [and others], (electronic resource)
- NASA Rotor 37 CFD code validation : Glenn-HT code, Ali A. Ameri ; prepared for the 47th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 5-8, 2009, (electronic resource)
- NASA's Evolutionary Xenon Thruster (NEXT) Prototype Model 1R (PM1R) ion thruster and propellant management system wear test results, Jonathan L. Van Noord and George C. Soulas, James S. Sovey ; prepared for the 31st International Electric Propulsion Conference (IEPC 2009) cosponsored by Aerojet, A.F. Offi ce of Scientifi c Research, AFRL, Busek Company, Inc., CU Aerospace, ERPS, EDA, Inc., L3 Communications, Michigan Space Grant Consortium/NASA, and Michigan Engineering, Ann Arbor, Michigan, September 20-24, 2009, (electronic resource)
- NASA's planned fuel cell development activities for 2009 and beyond in support of the exploration vision, Mark A. Hoberecht, (electronic resource)
- NEXT ion thruster thermal model, Jonathan L. Van Noord ; prepared for the 43rd Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Cincinnati, Ohio, July 8-11, 2007, (electronic resource)
- Nickel-titanium alloys : corrosion "proof" alloys for space bearing, components and mechanism applications, Christopher DellaCorte ; prepared for the 40th Aerospace Mechanisms Symposium cosponsored by the NASA Kennedy Space Center and Lockheed Martin Space Systems Company, Cocoa Beach, Florida, May 12-14, 2010, (electronic resource)
- Numerical comparison of NASA's dual Brayton power generation system performance using CO2 or N2 as the working fluid, Albert K. Owen, Thomas M. Lavelle, David S. Hervol, (electronic resource)
- Numerical simulation of vitiation effects on a hydrogen-fueled dual-mode scramjet, Manan A. Vyas [and others] ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- Numerical studies of a supersonic fluidic diverter actuator for flow control, Suleyman A. Gokoglu [and others] ; prepared for the 5th Flow Control Conference sponsored by the American Institute of Aeronautics and Astronautics, Chicago, Illinois, June 28-July 1, 2010, (electronic resource)
- Optical characterization of a multipoint lean direct injector for gas turbine combustors : velocity and fuel drop size measurements, Christopher M. Heath [and others] ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Optimal tuner selection for Kalman filter-based aircraft engine performance estimation, Donald L. Simon and Sanjay Garg ; prepared for Turbo Expo 2009 sponsored by the American Society of Mechanical Engineers, Orlando, Florida, June 8-12, 2009, (electronic resource)
- Orion active thermal control system dynamic modeling using simulink/MATLAB, Xiao-Yen J. Wang and James Yuko, (electronic resource)
- Path length fluctuations derived from site testing interferometer data, Roberto J. Acosta and James A. Nessel, Jacquelynne R. Morse, (electronic resource)
- Performance characterization of high energy commercial lithium-ion cells, Brianne T. Scheidegger, (electronic resource)
- Phased array noise source localization measurements of an F404 nozzle plume at both full and model scale, Gary G. Podboy, James E. Bridges, and Brenda S. Henderson ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Polarization dependent coupling of whispering gallery modes in microspheres, Clifford G. Adamovsky [and others] ; prepared for the Photonics North 2010 cosponsored by the Ontario Photonics Industry Network and Canadian Photonics Consortium, Niagara Falls, Ontario, Canada, June 1-3, 2010, (electronic resource)
- Portable diagnostics technology assessment for space missions, Emily S. Nelson and Arnon Chait, (electronic resource)
- Predicted and measured modal sound power levels for a fan ingesting distorted inflow, L. Danielle Koch ; prepared for the 16th Aeroacoustics Conference cosponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Stockholm, Sweden, June 7-9, 2010, (electronic resource)
- Predictions of supersonic jet mixing and shock-associated noise compared with measured far-field data, Milo D. Dahl, (electronic resource)
- Preliminary testing of a pressurized space suit and candidate fabrics under simulated Mars dust storm and dust devil conditions, James R. Gaier [and others] ; prepared for the 40th International Conference on Environmental Systems cosponsored by AIAA, AIChE, ASME, SAE Environmental Systems Committee, and the ICES International Committee, Barcelona, Spain, July 11-15, 2010, (electronic resource)
- Preprocessor that enables the use of GridPro grids for unsteady Reynolds-averaged Navier-Stokes code TURBO, Vikram Shyam, (electronic resource)
- Probabilistic methods for structural reliability and risk, Christos C. Chamis ; prepared for the 13th European Conference on Composite Materials sponsored by the European Society for Composite Materials Stockholm, Sweden, June 2-5, 2008, (electronic resource)
- Probabilistic simulation for combined cycle fatigue in composites, Christos C. Chamis, (electronic resource)
- Probabilistic simulation for nanocomposite fracture, Christos C. Chamis, (electronic resource)
- Propulsion Diagnostic Method Evaluation Strategy (ProDiMES) user's guide, Donald L. Simon, (electronic resource)
- Propulsion health monitoring of a turbine engine disk using spin test data, Ali Abdul-Aziz [and others] ; prepared for the Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring 2010 sponsored by the International Society for Optical Engineering (SPIE), San Diego, California, March 7-11, 2010, (electronic resource)
- Propulsion risk reduction activities for nontoxic cryogenic propulsion, Timothy D. Smith, Mark D. Klem, and Kenneth L. Fisher ; prepared for the Space 2010 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics, Anaheim, California, August 30 to September 2, 2010, (electronic resource)
- Quiet, efficient fans for spaceflight : an overview of NASA's technology development plan, L. Danielle Koch, (electronic resource)
- RP-2 thermal stability and heat transfer investigation for hydrocarbon boost engines, J.L. Van Noord, B.R. Stiegemeier ; prepared for the 57th Joint Army-Navy-NASA-Air Force (JANNAF) Propulsion Meeting sponsored by the JANNAF Interagency Propulsion Committee, Colorado Springs, Colorado, May 3-7, 2010, (electronic resource)
- Recent Stirling conversion technology developments and operational measurements at NASA Glenn Research Center, Salvatore M. Oriti and Nicholas A. Schifer ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009, (electronic resource)
- Recent advances in power conversion and heat rejection technology for fission surface power, Lee Mason ; prepared for the Nuclear and Emerging Technologies for Space (NETS-2009) cosponsored by ANS and AIAA, Atlanta, Georgia, June 14-18, 2009, (electronic resource)
- Remaining technical challenges and future plans for oil-free turbomachinery, Christopher DellaCorte and Robert J. Bruckner ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Report on lithium ion battery trade studies to support the Exploration Technology Development Program (ETDP) Energy Storage Project, Robert D. Green and Barbara I. McKissock, William R. Bennett, (electronic resource)
- Results and conclusions from the NASA isokinetic total water content probe 2009 IRT test, Andrew Reehorst and David Brinker, (electronic resource)
- Rotor wake/stator interaction noise prediction code : technical documentation and user's manual, David A. Topol and Douglas C. Mathews, (electronic resource)
- Rotorcraft transmission noise path model, including distributed fluid film bearing impedance modeling, Stephen A. Hambric [and others], (electronic resource)
- Sensor and actuator needs for more intelligent gas turbine engines, Sanjay Garg [and others] ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME) Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Shock positioning controls design for a supersonic inlet, George Kopasakis and Joseph W. Connolly ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-5, 2009, (electronic resource)
- Simulation of turbine tone noise generation using a turbomachinery aerodynamics solver, Dale Van Zante and Edmane Envia ; prepared for the 15th Aeroacoustics Conference (30th Aeroacoustics Conference) cosponsored by AIAA and CEAS, Miami, Florida, May 11-13, 2009, (electronic resource)
- Slot nozzle effects for reduced sonic boom on a generic supersonic wing section, Raymond S. Castner ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics Orlando, Florida, January 4-7, 2010, (electronic resource)
- Space Telecommunications Radio System (STRS) architecture standard, Richard C. Reinhart [and others], (electronic resource)
- Space environment effects on silicone seal materials, Henry C. de Groh III [and others], (electronic resource)
- Spatially-resolved beam current and charge-state distributions for the NEXT ion engine, James E. Pollard [and others] ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Spreadsheet calculations for jets in crossflow : opposed rows of inline and staggered holes and single and opposed rows with alternating hole sizes, James D. Holdeman, James R. Clisset, Jeffrey P. Moder, (electronic resource)
- Statistical analysis of a large sample size pyroshock test data set including post flight data assessment, James William O. Hughes and Anne M. McNelis ; prepared for the 80th Shock and Vibration Symposium sponsored by the Shock and Vibration Information Analysis Center (SAVIAC), San Diego, California, October 25-29, 2009, (electronic resource)
- Status of the NASA's Evolutionary Xenon Thruster (NEXT) long-duration test after 30,352 hours of operation, Daniel A. Herman ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Stiffness and damping coefficient estimation of compliant surface gas bearings for oil-free turbomachinery, Christopher DellaCorte ; prepared for the International Joint Tribology Conference cosponsored by the STLE and ASME, San Francisco, California, October 17-20, 2010, (electronic resource)
- Stirling convertor extended operation testing and data analysis at Glenn Research Center, Peggy A. Cornell [and others] ; prepared for the Seventh International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Denver, Colorado, August 2-5, 2009, (electronic resource)
- Summary of Test Results From a 1 kWe-class free-piston Stirling power convertor integrated with a pumped NaK loop, Maxwell H. Briggs [and others] ; prepared for the 8th International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Summary of the Large Civil Tiltrotor (LCTR2) engine gearbox study, Christopher A. Snyder [and others] ; prepared for the International Powered Lift Conference cosponsored by the AIAA, SAE Aerospace, and RAeS, Philadelphia, Pennsylvania, October 5-7, 2010, (electronic resource)
- Supersonic free-jet combustion in a ramjet burner, Charles J. Trefny and Vance F. Dippold III ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Synthesis of two new group 13 benzoato-chloro complexes : a structural study of gallium and indium chelating carboxylates, Stan A. Duraj [and others] ; prepared for the Spring 2010 National Meeting and Exposition sponsored by the American Chemical Society, San Francisco, California, March 21-25, 2010, (electronic resource)
- Test rack development for extended operation of advanced stirling convertors at NASA Glenn Research Center, Gina M. Dugala, (electronic resource)
- Test results from a high power linear alternator test rig, Arthur G. Birchenough and David S. Hervol, Brent G. Gardner ; prepared for the 8th International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- The beginner's guide to wind tunnels with TunnelSim and TunnelSys, Thomas J. Benson, Carol A. Galica, Anthony J. Vila ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- The effect of composition on the surface finish of PS400 : a new high temperature solid lubricant coating, Christopher DellaCorte [and others] ; prepared for the 65th Annual Meeting and Exhibition sponsored by the Society of Tribologists and Lubrication Engineers, Las Vegas, Nevada, May 16-20, 2010, (electronic resource)
- The effect of magnetohydrodynamic (MHD) energy bypass on specific thrust for a supersonic turbojet engine, Theresa L. Benyo ; prepared for the 48th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2010, (electronic resource)
- The effect of nondeterministic parameters on shock-associated noise prediction modeling, Milo D. Dahl, Abbas Khavaran ; prepared for the 16th Aeroacoustics Conference cosponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Stockholm, Sweden, June 7-9, 2010, (electronic resource)
- The lattice and thermal radiation conductivity of thermal barrier coatings : models and experiments, Dongming Zhu and Charles M. Spuckler ; prepared for the 33rd International Conference and Exposition on Advanced Ceramics and Composites sponsored by the American Ceramic Society, Daytona Beach, Florida, January 18-23, 2009, (electronic resource)
- The mechanical performance of subscale candidate elastomer docking seals, Marta B. Bastrzyk and Christopher C. Daniels ; prepared for the 51st Structures, Structural Dynamics, and Materials Conference cosponsored by AIAA, ASME, ASCE, AHS, and ASC, Orlando, Florida, April 12-15, 2010, (electronic resource)
- The reduction of lunar regolith by carbothermal processing using methane, R. Balasubramaniam, S.A. Gokoglu, U. Hegde, (electronic resource)
- The testing behind the test facility : the acoustic design of the NASA Glenn Research Center's world-class Reverberant Acoustic Test Facility, William O. Hughes [and others], (electronic resource)
- Thermal development test of the NEXT PM1 ion engine, John R. Anderson [and others] ; prepared for the 43rd Joint Propulsion Conference cosponsored by AIAA, ASME, SAE, and ASEE, Cincinnati, Ohio, July 8-11, 2007, (electronic resource)
- Thermal performance of Orion active thermal control system with seven-panel reduced-curvature radiator, Xiao-Yen J. Wang and James R. Yuko ; prepared for the Thermal and Fluids Analysis Workshop (TFAWS) sponsored by the NASA Engineering Safety Center, Houston, Texas, August 16-20, 2010, (electronic resource)
- Three-body abrasion testing using Lunar dust simulants to evaluate surface system materials, Ryan L. Kobrick [and others] ; prepared for the 40th International Conference on Environmental Systems cosponsored by the AIAA, AICHE, ASME, SAE Environmental Systems Committee, and ICES International Committee, Barcelona, Spain, July 11-15, 2010, (electronic resource)
- Thrust stand characterization of the NASA Evolutionary Xenon Thruster (NEXT), Kevin D. Diamant [and others] ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010, (electronic resource)
- Total water content measurements with an isokinetic sampling probe, Andrew L. Reehorst, Dean R. Miller, and Colin S. Bidwell, (electronic resource)
- Transition in gas turbine control system architecture : modular, distributed, and embedded, Dennis Culley ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010, (electronic resource)
- Ultrasonic phased array inspection for an isogrid structural element with cracks, D.J. Roth [and others], (electronic resource)
- Virtual mission operations of remote sensors with rapid access to and from space, William D. Ivancic [and others] ; prepared for the SpaceOps 2010 Conference sponsored by the American Institute of Aeronautics and Astronautics, Huntsville, Alabama, April 25-30, 2010, (electronic resource)
- Wind tunnel model design for the study of plume effects on sonic boom for isolated exhaust nozzles, Raymond S. Castner ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-5, 2009, (electronic resource)
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.livebrary.com/resource/weaUfdjDApY/" typeof="PublicationEvent http://bibfra.me/vocab/lite/ProviderEvent"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.livebrary.com/resource/weaUfdjDApY/">Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.livebrary.com/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="https://link.livebrary.com/">Public Libraries of Suffolk County, New York</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the ProviderEvent Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.livebrary.com/resource/weaUfdjDApY/" typeof="PublicationEvent http://bibfra.me/vocab/lite/ProviderEvent"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.livebrary.com/resource/weaUfdjDApY/">Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2010</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.livebrary.com/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="https://link.livebrary.com/">Public Libraries of Suffolk County, New York</a></span></span></span></span></div>
